Victory Motorcycles - ATLAS Throttle Lock
V for Victory! While Victory may have lost the power struggle with heritage brands Harley Davidson and Indian, they're still a winner in our books. Over their 20+ year history, Victory has brought a wide range of cruiser and touring bikes to the table. The best part? The ATLAS works on all of them! You will have to switch out your factory grips for a set of aftermarket to create the needed space, but never fear - you've got lots of options to choose from, be it Kuryakyn, Avon, or even Indian Scout grips! Bolt on an ATLAS and cruise to Victory!
|Models - Install Tips||Years||Best Kit|
|Cross Country||All||Either Kit|
|Hammer / S||All||Either Kit|
|Kingpin / Deluxe / Tour||All||Either Kit|
|V92SC Sport Cruiser||All||Either Kit|
|V92TC Touring Cruiser||All||Either Kit|
|Vegas / Jackpot / 8-Ball||All||Either Kit|
|Vision Street / Tour||All||Either Kit|
Is your motorcycle not listed here? Please email us the Year, Make and Model of your motorcycle and we can help determine fitment. If possible, please include an image of the gap between the throttle housing and your throttle grip. Contact Us Page
|Top Kit||Bottom Kit|
|Top Kit Polished||Bottom Kit Polished|
Top Kit: You'll want a Top Kit if:
- There is less than 1.5 inches (38 mm) of clearance between the tank and the throttle housing at full right turn.
- There's a heated grip wire that comes out the bottom half of your rubber grip flange.
Bottom Kit: You'll want the Bottom Kit if:
- There's a heated grip wire that comes out the top half of your rubber grip flange.
- There are no other interferences. The majority of motorcycles will be able to use the Bottom Kit.
What's included with the Kit?
Your kit comes with everything you need to mount the ATLAS on many different motorcycles.
- Installation Instructions
- Allen Key (2mm)
- 2 M3 Bolts with thread locker
- 3 sizes of friction pads (2 of each)
- Alcohol Prep Pad
Friction Pads are required.
The ATLAS Throttle Lock was designed to be used with friction pads. Friction pads can last anywhere from 3,000 miles to 40,000+ miles. The wear depends on how often you rotate the throttle while it is engaged and if your throttle housings has sharp edges that rub on the friction pad. If you need replacement friction pads, you can buy more here: Friction Pads.
Which friction pad should you use?
The friction pads come in 3 different thicknesses. Your kit comes with two of each size but you will only need to apply one pad to your ATLAS. Watch our installation video and follow the instructions to determine which friction pad works best. You will want to start with the thickest friction pad and see if it fits between the throttle housing and the ATLAS Stopper Arm. If it doesn't fit, try the next size down until you find the right size that does not make contact with the throttle housing when disengaged.
Where should I place my friction pad?
We recommend adhering the friction pad along the top edge of the Stopper Arm, but, for some motorcycles, this isn't the best solution. If your throttle housing has any bevels on it which will interfere with the friction pad during any part of the rotation, then you will want to adjust the placement of the friction pad to avoid those bevels. Sometimes this means placing the friction pad a few millimeters away from the top edge of the stopper arm, or maybe placing it to the far right or left on the stopper arm.
All Motorcycle Makes and Models
Do you have another type of motorcycle? The ATLAS Throttle Lock will work on that too! Click on one of the brands below to learn more.
1. On all Victory models, the stock grips must be changed to an aftermarket design. The stock grips provide too narrow a gap for the ATLAS to mount between the throttle housing and grip flange. Once the grips are changed to an aftermarket design, either ATLAS Kit can be used.
Works great, especially on long rides. Easy to install, works better than expected
Have had too much snow to go out and try it
The throttle lock works exceptionally well on my 2015 Versys 650...much more enjoyable long distance driving now. Only takes a few minutes to fit..👍 Off course early days yet, as only been using it a few weeks, but so far 10/10....
Easy to install. Works as expected. Easy to operate.
This is a great throttle lock. Others are clunky and in the way and very ugly. The atlas looks great on the bike. Very subtle. Now it is still a throttle lock and works with friction, so it does slide a bit and need adjusted from time to time, but it is by far the best I have used.
Easy to install and easy to use , now I will enjoy the long rides 🙌👍
We are having winter here in Newfoundland and our winters last tell April so I will do the Review then.
What’s not to like ?
Quick delivery, easy install and good results.
What else do you need ?
In fairness with the crappy winter my testing has been limited but all indicates same good results for longer usage.
Just received my Atlas Throttle Lock. Very easy install and the fit and finish are excellent. The communication and shipping were spot on and very quick. These people wanna do great business. Highly recommend them and their products.